70
5.5.8.6.1 Single Tour
Please enable tour function. Then set interval time and select corresponding cameras.
You can select “ALL” to tour between all channels. Please note only Group 1
supports “ ALL “function.
Note:
z
”- -“means that there is no alarm activation tour.
z
If you have selected the “ALL” for the matrix output in Group 1, the matrix output
will tour only between all cameras and the other groups setting will be null.
5.5.8.6.2 Alarm Tour
Select the “alarm in” channel number from the dropdown list. If there is an alarm
signal from the channel selected, the matrix output will go to tour as you set in the
“Alarm” setting (Main Menu->Setting->Alarm). See Figure 5-30.
Alarm tour has higher priority than single tour during this period, the single tour will
stop. After alarm activation tour, the matrix output will continue single tour.
Figure 5-30
5.5.8.7 Examples
5.5.8.7.1 Example one
In Figure 5-31, matrix outputs”1”, “3”, “4” tour between all cameras of the DVR.
Matrix output 2 tours between “CAM1, CAM6 and CAM7” of the DVR. The interval is
five seconds.