25
Figure 3-1
3.6.2 Connecting Video Output
This section provides information about physically connecting video display devices
to the DVR. See Figure 3-2.
When you connect the DVR with a TV monitor or VGA monitor, the DVR can
automatically detects the monitor type. And without any output device, the DVR is
configured to use a TV monitor by default. In this case, if your application requires a
VGA monitor, you need to press the button
“
FN
”
or Shift on the front panel.
NOTE:
Video output 1 and VGA can
’
t display at the same time. But Video output 2 can
display properly with Video Output 1 or VGA.
Figure 3-2
