4. Features
Camera Specifications
•
CCD Sensor:
1/4" Interline Transfer CCD
•
Zoom Magnification:
x10 Optical Zoom, x10 Digital Zoom (Max. x 100 Zoom) 10x Zoom Model
x12 Optical Zoom, x10 Digital Zoom (Max. x120 Zoom)
12x Zoom Model
Variable focus lens model (3.8mm~9.5mm), size 38x38 Variable Focus Lens Model
•
True Day & Night Function with moveable IR cut filter
•
Various Focus Mode: Auto-Focus / Manual Focus / Semi-Auto Focus.
(except the Variable Focus Lens model)
•
Independent & Simultaneous Camera Characteristic Setup in Preset operation
Powerful Pan/Tilt Functions
•
Max. 360°/sec high speed Pan/Tilt Motion
•
Using Vector Drive Technology, Pan/Tilt motions are achieved in the shortest path.
As a result, time to target view is reduced dramatically and the video on the monitor
is very natural to watch.
•
For jog operation using a controller, since ultra slow speed 0.05°/sec can be
reached, it is very easy to position a camera to the desired target view. Additionally
it is easy to move the camera to a desired position with zoom-proportional pan/tilt
movement.
Preset, Pattern, Swing, Group, Privacy Mask and More…
•
Max. 127 Presets are assignable and characteristics of each preset can be set up
independently, such as White Balance, Auto Exposure, Label and so on.
•
Max. 8 set of Swing actions can be stored. This enables camera to move repetitively
between two preset positions with a designated speed.
•
Max. 4 Patterns can be recorded and played back. This enables you to move the
camera from any PTZ trajectory recorded by the joystick movement as closely as
possible.
•
Max. 8 set of Group actions can be stored. This enables you to move the camera
repetitively from a combination of Presets or Patterns or Swings. A Group is
composed of max. 20 entities of Preset/Pattern/Swings.
•
Privacy Masks are assignable, so as not to intrude on other’s privacy. (4 Privacy
Zones)
PTZ (Pan/Tilt/Zoom) Control
•
With RS-485 communication, a max. of 255 cameras can be controlled. Pelco-D or
Pelco-P protocol can be selected as a control protocol in the current version of
firmware.
OSD (On Screen Display) Menu
•
OSD menu is provided to display the status of a camera and to configure the
functions interactively.
•
The information such as Camera ID, Pan/Tilt Angle, Alarm Input and Preset can be
displayed on screen.
Alarm I/O Functions
•
4 alarm sensor inputs are available.
•
To prevent external electric noise and shock completely, the alarm sensor inputs are
decoupled with a photo isolator.
•
The signal range of sensor input is from DC 5.0 to 12.0 volts to adopt to various
applications.
Doc # INS 20Z704T-PZ10
Issue Date: 08/13/2009
Revision: B
Page 6 of 40