37
!
Dwell Time
– the dwell time if
Call By Event
is set to Motion, Alarm, or Both.
Press
+/-
buttons to adjust the value (3-60 seconds, discrete).
!
Audio
– the AUDIO IN corresponding to this camera. The audio data for the
selected AUDIO IN will be recorded with the video data for this camera. Press
+/-
buttons to select none (N/A) or AUDIO Inputs (1). The default setting is
“N/A”.
!
Record Quality
– the record quality for this camera. Press
+/-
buttons to select
the value (1-9, with 1 the lowest (rough) quality, 9 the highest (fine) quality).
!
Event Record IPS
– the IPS (Images Per Second) for this camera if certain event
(Motion, Alarm) occurs for this camera. This camera will be recorded at this
rate for Post-record time since the event occurs. (Please refer to the following
sections for Post-record time.) Press
+/-
buttons to select the value (0 – 25 (PAL)
/ 30 (NTSC), discrete).
!
Pre-record IPS
– the pre-record IPS for this camera if certain event (Video Loss,
Motion, Alarm) occurs for this camera. This camera is recorded at this rate for
Pre-record time before the event occurs. (Please refer to the following sections
for Pre-record time.) For this DVR, the value is always the same as Event
Record IPS.
!
Normal Record IPS
– the normal record IPS for this camera. This camera will
be recorded at this rate if no event occurs. Press
+/-
buttons to select the value
(0 –
Pre-record IPS
for this camera, discrete).
Please note that for High
compression ratio in Pre-Camera setup, Normal Record IPS is always the same as
Event Record IPS.
