The example below shows a Lynx system consisting out of a Lynx Power In, Lynx Shunt VE.Can and Lynx Distributor. Together
they form a continuous busbar, with un-fused battery connections, battery monitor, main system fuse and fused load connections.
Figure 2. Example of Interconnected Lynx modules without their covers (Lynx Shunt VE.Can)
Battery connections
Fused DC loads and charge connections
Battery monitor and main fuse
Interconnected Lynx modules: Lynx Power In, Lynx Shunt VE.Can and Lynx Distributor
The example below shows a Lynx system consisting out of a Lynx distributor, Lynx Smart BMS and another Lynx Distributor.
Together they form a continuous busbar, with fused battery connections, battery monitor, BMS system, contactor and fused load
connections
Fused battery connections
Fused DC loads and charge connections
Battery monitor, BMS and contactor
Interconnected Lynx modules: Lynx Distributor, Lynx Smart BMS and another Lynx Distributor
5.1.3. System example - Lynx Shunt VE.Can, Lynx Power In, Lynx Distributor and lead acid
batteries
This system contains the following components:
• Lynx Power In with 4 paralleled 12V lead acid batteries.
• Identical cable lengths for each battery.
• Lynx Shunt VE.Can with main system fuse and battery monitor.
• Lynx Distributor with fused connections for inverter/charger(s), loads and chargers. Note that additional modules can be added
if more connections are needed.
• CCGX (or other GX device) to read out the battery monitor data.
Lynx Distributor
Page 8
System Design
