manualshive.com logo in svg

Victron energy CCGX, Инструкция по эксплуатации

Поделиться
Скачать
Victron energy CCGX Скачать руководство пользователя страница 15

2018-08-21 11:59

15/27

Color Control GX manual

Victron Energy - https://www.victronenergy.com/live/

Item

Default Description

Configure the Energy meters, used for one of three things:
Measure the output of a PV Inverter
Measure and regulate a 

Hub-4 system

Measure and regulate a 

ESS system

Measure the output of an AC Generator.
ESS
Configure Energy storage system (ESS) 

ESS system

.

Hub-4
Configure Hub-4 system 

Hub-4 system

.

Ethernet
Select the configuration type (DHCP vs. manual configuration) and IP settings.
Wi-Fi
Manage wireless networks and IP settings.
GPS
Format

Select the format in which to show the Latitude and Longitude.

Speed unit

km/h

Choose between km/h, meters per second, miles per hour, or knots.

Generator start/stop
Configure generator autostart settings and conditions. 

Generator auto start/stop on CCGX and Venus GX

Tank pump
Configure automatic starting and stopping of pump based on tank level(sender) information. 

Pump auto start/stop with Color Control GX

Relay

Function

Alarm
relay

Select the relay function. Possible functions are 'Alarm relay', 'Generator start/stop', 'Tank pump' and 'None' (disabled).

Polarity

Normally
open

Select the polarity of the relay on the back of the CCGX. 'Normally open' or 'Normally closed'. (Note that setting it to
normally closed increases the CCGX power draw.)

Services

ModbusTCP

Off

This setting enables the ModbusTCP service. More information about ModbusTCP in this document:

https://www.victronenergy.com/upload/documents/Whitepaper-Data-communication-with-Victron-Energy-products_EN.pdf

VRM two-way
communication

No

Enable remote configuration and firmware updates. 

VE Power Setup manual

When using a VE.Bus system, it is possible to configure the severity of problems on the VE.Bus
system that should cause a notification to show up on the CCGX (and make it beep):

Disabled: The CCGX will never beep or show a notification
Alarm only: The CCGX will only beep and a show a notification when the VE.Bus system
switched off in an alarm condition.
Enabled (default): The CCGX will beep and show a notification

When all done, don't forget to change the access level to user when required.

Click the thumbnail below to see the complete menu-tree:

Содержание CCGX




























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды