02.2020
INSTRUCTION MANUAL
for installation and operation of pellet stove
VITTORIA В*
25
PRODUCT FICHE
1. Supplier's name or trademark.
Victoria-05 Ltd.
1B Ivan Momchilov Str.
5100 Gorna Oryahovitsa
Republic of Bulgaria
Phone: +359 618 60282
E-mail:
2. Supplier's model identifier.
Pellet stove
VITTORIA B*
3. Energy efficiency class.
А++
4. Direct heat output
2.1 kW
5. Indirect heat output.
16.1 kW
6. Energy efficiency index.
130
7. Seasonal space heating energy efficiency.
92.4%
8. Specific precautions during assembling, installing or maintaining:
•
To operate properly and safely, pellet stove should be installed in a room that is fire-resistant and equipped with
everything needed (electricity, air exchange, vents).
•
Do not obstruct fresh air to enter the room where pellet stove is installed and through the holes on the pellet stove.
•
The temperature of the room where it is installed the pellet stove must not be lower than 0˚C.
•
Use appropriate non-freezing additives for water in the system.
•
Make sure the temperature of the return water is not lower than 45˚C.
•
Pellet stove must not run without water in the system and the pressure must not fall below 1 bar. Should the system be
alighted without water, pellet stove can be damaged.
•
Pellet stove is designed to heat water through automated burn in the combustion chamber of wood pellets with a
diameter of Ø 6 mm.
•
Warranty is voided by unauthorized use of combustible material.
•
The risk that could arise from non-compliance of this instructions manual is a direct contact with electric parts
(internal), contact with fire or hot surfaces.
•
Pellet stove is equipped with safety components that guarantee lock it automatically in case of failure of any of its
components. Safety components are activated without outside interference.
•
Necessary for the proper operating of the pellet stove is its proper installation in accordance with the following
instructions.
•
Fire door should not be opened during operation of the pellet stove. The burning process is automated and does not
require external intervention.
•
Do not allow to burn the pellet stove if there are cracks in the glass.
•
Under no circumstances should not be allowed penetration of foreign substances in the firebox or hopper.
•
Do not use combustible materials to clean soot in the chimney.
•
Turn off the pellet stove from the grid-circuit before cleaning or servicing.
•
Use a vacuum cleaner to clean the combustion chamber and pellet fuel hopper only when pellet stove is cold.
•
Do not use water to clean the internal parts of the pellet stove.
•
During operation of the pellet stove must not be allowed to touch a child to its surface, as it is hot. Danger of burns!
•
The handle of the pellet stove warms as much as the front panel, so it must be operated with a heat-resistant glove.
During operation of the pellet stove, the flue pipes and the fire door are hot.
•
Do not place flammable objects and liquids away from the pellet stove.
•
NEVER
use flammable liquids to burn the pellet stove.
•
Do not soak pellet stove and do not touch electrical components with wet hands.
•
Do not mount any adapters to flue pipes and chimney.
•
Rating label is placed on the back of the pellet stove.
•
Keep this instruction manual, warranty card and purchase invoice in good condition, as will be necessary in any
inquiries.