Victor ULTRA-CUT 200, Руководство по эксплуатации, Страница: 80 / 168

OPERATION 4-8 Manual No. 0-5133
ULTRA-CUT 200
4.08 Back up and Restoration of Custom Processes.
Users can create their own custom cut processes. These can be lost by accidentally deleting them on the TDC 3000
or they can be over written when updating programs. They can also be lost if the DSC 3000 should be replaced. We
recommend you back up your custom processes every time a new one is created. To back up you will need a USB
Flash drive.
Backing Up Custom Process:
1. For the remotely mounted DSC 3000 insert the flash drive in the USB connector on the back. If using the TSC
3000 mounted in the plasma supply front panel the USB connector is in the front under the clear plastic
protective screen.
2. Go to the HOME screen. Select SETUP. Enter the 5 digit password (00000) unless you’ve changed it.
3. Press button “Back Up Custom>USB”
4. Very quickly, depending on how many custom processes there are, you should see along the bottom of the
screen the message “Copy to D:\TD\CustomFiles\Complete” at which point you can remove the flash drive.
A r t # A-09234_AB