Victor ULTRA-CUT 200, Руководство по эксплуатации, Страница: 56 / 168

INSTALLATION 3-30 Manual No. 0-5133
ULTRA-CUT 200
3.17 Install TSC-3000 Touch Screen Control
Mounting Dimensions
6.99 in
[177.5 mm]
TSC-3000 Profile
5.58 in
[141.7 mm]
2.35 in
[59.69 mm]
1.11 in
[28.2 mm]
12.45 in
[316.2 mm]
.25 in
[6.35 mm]
11.80 in
[299.7 mm]
10.83 in
[275.0 mm]
TSC-3000 Top
A r t # A-09156
Preparation
1. Select a clean, dry location with good ventilation and adequate working space around all components.
Review the safety precautions in the front of this manual to be sure that the location meets all safety
requirements. The TSC-3000 mounting brackets allow for mounting on or under a horizontal surface as
well as left or right of a vertical surface. Choose which ever works best for protection against moving
equipment and flying metal/cutting debris etc..
2. Once the unit has been secured to a flat surface, attach Communication cable (“V” which is already
attached to the CCM done in sub section 3.10) and ground cable (“F”) to the rear of the unit.
Communication Cable to/from
CCM rear of power supply
Ground Cable to/from
“Star” ground on table
A r t # A-09157