INTRODUCTION
NOTICE
• Drawings and/or pictures in this manual
may be exaggerated for clarity.
• The tool, along with this operating
and maintenance instructions manual,
contains trademarks, copyrights, and/or
patented features that are the exclusive
property of Victaulic.
The Power Mule II is a high-torque power drive
for driving the following Victaulic Cut Grooving
Tools:
• VG
• VG28GD
• VG28GD-ABR
• VG26GD
• VG26GD-COR
• VG824
• VG824-ABR
• VG824-COR
• VG824DG
• VG828
This heavy-duty, two-wheeled unit drives
Victaulic cut grooving tools at the speed and
power necessary for accurate grooving . It
has a rotating head for horizontal and vertical
applications . It is also equipped with a Forward-
Off-Reverse control and integral foot switch .
For detailed instructions, refer to the operating
and maintenance manual for the applicable tool .
The Power Mule II operates at 13 amps with a
no-load operating speed of 32 rpm . Under load,
the power mule runs at slower speeds . This is a
desirable feature, since heavier loads and slower
speeds reduce tool-bit chatter .
RECEIVING THE TOOL
Power mules are shipped on a pallet with the
power head removed from the frame . Upon
receipt of the power mule, remove any packing
materials, and ensure that all necessary parts
are included . If any parts are missing, contact
Victaulic .
PALLET CONTENTS
Qty.
Description
1
Power Mule II
1
Safety Foot Switch/Power Cord/Plug Assembly
(Located in the Storage Bag)
1
Square-Drive Adapter (installed in Power Head)
2
Operating and Maintenance Instructions Manual
RETURNING THE TOOL
Prepare tool for shipment as received . Contact
Victaulic with questions .
TM-PMII_6
REV_C
TM-PMII
/ Operating and Maintenance Instructions Manual
