OPERATOR SAFETY
INSTRUCTIONS
The Victaulic Power Mule II is designed
to drive Victaulic Cut Grooving Tools . These
instructions shall be read and understood by
each operator PRIOR to working with the
Power Mule II . These instructions describe safe
operation of the tool, including set up and
maintenance . Each operator shall become
familiar with the tool’s operations, applications,
and limitations . Particular care shall be given
to reading and understanding the dangers,
warnings, and cautions described throughout
these operating instructions .
Use of this tool requires dexterity and
mechanical skills, as well as sound safety habits .
Although this tool is designed and manufactured
for safe, dependable operation, it is difficult to
anticipate all combinations of circumstances
that could result in an accident . The following
instructions are recommended for safe operation
of this tool . The operator is cautioned to always
practice “safety first” during each phase of
use, including set up and maintenance . It is the
responsibility of the lessee or user of this tool to
ensure that all operators read this manual and
fully understand the operation of this tool .
Store this manual in a clean, dry area where it is
always readily available . Additional copies
of this manual are available upon request
through Victaulic, or can be downloaded at
victaulic .com .
DANGER
1. Avoid using the tool in potentially
dangerous environments.
Do not expose
the tool to rain, and do not use the tool in
damp or wet locations . Do not use the tool
on sloped or uneven surfaces . Keep the
work area well lit . Allow sufficient space to
operate the tool properly .
WARNING
1. Prevent back injury.
Always use proper
lifting techniques when handling tool
components .
2. Wear proper apparel.
Do not wear loose
clothing, jewelry, or anything that can
become entangled in moving parts .
3. Wear protective items when working with
tools.
Always wear safety glasses, hardhat,
foot protection, and hearing protection .
4. Keep hands and tools away from power
drive during grooving operation.
Rotation
of the power drive can pinch or entangle
fingers and hands .
5. Do not reach inside pipe ends during tool
operation.
Pipe edges can be sharp and
can snag hands and shirt sleeves .
7. Do not over-reach.
Maintain proper
balance at all times . Verify that all controls
are easily accessible to the operator .
8. Do not make any modifications to the
tool.
Do not remove any safety guarding
or any components that would affect tool
performance .
9. Prevent accidental start-ups.
Always
unplug the power head from the safety foot
switch . This power mule’s rotation control
switch DOES NOT feature a “neutral” or
“off” position . Depressing the safety foot
switch will energize the tool immediately
if it is not unplugged .
ALWAYS USE THE
SAFETY FOOT SWITCH TO OPERATE
THE POWER MULE.
TM-PMII_4
REV_C
TM-PMII
/ Operating and Maintenance Instructions Manual
