31
6.
Start clapper shaft into valve body, and place one
spacer between clapper and valve body, as shown above.
7.
Install spring onto clapper shaft, making sure loop is
toward clapper, as shown above.
8.
Place other spacer between clapper and valve body,
and finish inserting clapper shaft through clapper arm
and valve body, as shown above.
9.
Apply thread sealant to clapper shaft-retaining plugs
and install into valve body.
10.
Check clapper for freedom of movement.
11.
Replace the cover plate by following the “Installing
Cover Plate Gasket and Cover Plate” section, starting on
this page.
Installing Cover Plate Gasket and
Cover Plate
1.
Verify cover plate gasket is in good condition. If gasket
is torn or worn, replace with a new, Victaulic-supplied
gasket.
2.
Align cover plate gasket holes with holes in cover plate.
DISCONTINUED
PRODUCT
