Vicon Surveyor MKII, Руководство по программированию для пользователя

Страница: 10 / 30

7
2.2 IRIS SET

Set iris mode

Set iris level

Set iris default level
2.3 FOCUS SET

Set focus limit

Set focus mode
2.4 WHITE BALANCE SET

Select white balance mode

Adjust WB-R

Adjust WB-B
2.5 EXPOSURE SET

Select exposure priority mode

Set exposure level

Enable/disable backlight

Set digital slow shutter (DSS)

Select B/W mode

Select B/W sensitivity

Enable/disable WDR

Stabilize
2.6 SPECIAL FUNCTION

Set mirror mode Off/Mirror/Reverse/Rev-Mir

Enable/disable image freeze

Set the camera sharpness

Set the DNR Mode On/Off

Set the manual DNR level

Max AGC level

Slow AE

High Rex On/Off
3.
PTZ FUNCTION SET
3.1 PRESET SET

Enable/disable preset title display

Set Preset

Set preset title

Clear title

Clear preset
3.2 AUTOPAN SET

Enable/disable title display

Autopan number

Direction

Speed

Boundary lagging time

Set autopan title

Clear title

Clear autopan
Note: Autopan start and end positions must be set by keypad.
3.3 AUTO TOUR SET

Enable/disable auto tour display

Auto tour number

Set auto tour title

Clear title

Clear auto tour
3.4 HOME RETURN SET
 Set home return position
 Home return time
 Power off save
3.5 NORM TOUR SET
 Tour number
 Action and Time
The dome can be set with the maximum of 6 normal tours, and
each normal tour can includes 14 actions (preset, auto tour,
autopan), with each action time being set independently.
3.6 PTZ TIME OUT
 Set Time out value
 Set Action Preset/Stop
3.7 SCHEDULE
 Set up scheduled events such as alarms or tours
4. ADDITIONAL FUNCTION MENU
4.1 MASK SET
Two privacy mask modes are available.
Under privacy mask mode 1:
 Enable/disable privacy mask
 Select mask number
 Enable/disable privacy mask status Title display
For mask set, the area is defined by the sector partition function.
Under privacy mask mode 2:
 Enable/disable privacy mask
 Set mask color
 Select mask number
 Set mask
Note: Mask mode 1 and 2 cannot be run concurrently.
4.2 ALARM SET
 Alarm enable switch
 Select alarm in number
 Set alarm input status
 Set action
 Set reset action
 Set acknowledgement mode
 Title controls
4.3 SECTOR SET
 Enable/disable Title display
 Set sector number
 Set sector title
 Sector set
 Clear title
 Increase Angle