Vicon Surveyor MKII, Руководство по программированию для пользователя

Страница: 9 / 30

6
Chapter IV Menu Programming
The Analog Domes feature OSD menus for setting up various
operation parameters. To utilize functions like AUTOPAN, home
position, area partition and privacy mask, appropriate settings
must be defined via these menus.
4.1 Menu Navigation and Operation
The system keypad can be used to call up and navigate through the
programming menus, as well as to define system parameters. For
guidelines on menu navigation and operation, refer to the table
below Note that these operations are made in the Preset Store
mode.
1. Press and hold PROG button, then press the number key 2, and
then release PROG to enter intor the Preset Store mode.
2. To access the main menu enter 9 + 4 + PRESET.
PRESET 9
Press Press the number key
1 PRESET
Press the number key Press
3. The following screen will appear.
4. The joystick can now be used to navigate the menu options
up and down. Moving the joystick to the RIGHT (or pressing the
A/P key) will select the desired option. Moving the joystick to the
LEFT (or pressing the A/I key) will exit or cancel the option.
5. If the Menu screen is left open and unused for more than 5
minutes it will exit automatically.
4.2 MAIN MENU
1. SYS-INFO SET
1.1 SYSTEM SET
 Display the current S/N number
 Display the camera ID number
 Display the broad ID
 Display the control protocol
 To select the baud rate
 To select the communication mode
 Display the current software version
 Display the lens type
Note: The displayed address and baud rate in the menu can not be
changed if they are set via DIP switch.
1.2 DOME TITLE SET
 To set the title
 To set the title display line and column
 Enable/disable title display
 Clear title
1.3 SYSTEM TITLE SET
 Set the position of the system text
 Enable/disable individual system titles:
Lens, Temperature, Humidity, Pressure and Pressure Alarm
1.4 SYSTEM INFO DISP
 Display the exposure mode
 Display the focus mode
 Display the iris level
 Display the day/night switching mode
 Set the Language (currently English/French)
1.5 FACTORY DEFAULT
 Select to default all or some parameters
 System Default
 Camera Default
 All Title Clear
 PTA Info Clear
 All Parameters Default
1.6 DOME RESTART
 Perform a soft reset
1.7 DATE AND TIME SET

Set the Date and Time settings and format
1.7 DST SET

Enable and configure Daylight Saving Time
2.
CAMERA FUNCTION SET
2.1 ZOOM SET

Enable/disable digital zoom function

Set zoom speed
PROG 1 PROG
Press & hold Press the number key Release
2
4