22
Formatting the Camera
After the camera(s) is defined in the
Third Party Site
screen, the format can be defined in the
Third Party
Format
screen.
Note: Third party format is set up in each workstation individually; it is not a global setting for the camera(s).
Therefore, if a camera can send both M-JPEG and MPEG-4 images, user can request M-JPEG on
certain sites even if the camera is defined as MPEG-4.
1. From the ViconNet
Main
window, click
. The
Setup Site Selection
window is displayed,
showing a list of all currently connected transmitters and Workstations.
2. Select the Site (workstation) for which you want to configure the format and click
. The
System Settings
window is displayed.
3. From
the
System Settings
window, select the
button. The
Third Party Format
screen
displays.
4. Select the format for the workstation you are working on. The default format is the one that the camera
uses according to its setup; selecting one of the other options will request this video format from the
camera. If the camera doesn’t support the selected format, the default format will be used.
5. Click
OK
to save your settings or
Cancel
.
XX181-20-00 Rev 908 VN-957V5 IP Camera
