18
ViconNet Configuration
Adding Camera to the ViconNet System
The I-ONYX VN-957 camera will not automatically show up on the site list. It must be added to the ViconNet
system. Unlike non-ViconNet cameras, this camera does not require a third party license to be used in the
system.
Note: I-ONYX VN-957cameras only need to be added once in the Nucleus for the entire system.
1. From the ViconNet
Main
window Nucleus, click
. The
Setup Site Selection
window is
displayed, showing a list of all currently connected transmitters and Workstations.
2. Select the Nucleus for which you want to configure a camera and click
. The
System
Settings
window is displayed.
3. From the System Settings window, select the
button. The following screen
will display.
XX181-20-00 Rev 908 VN-957V5 IP Camera
