12
•
IP Address:
The default IP address is 192.168.0.100. Set the address the camera will
have on your ViconNet system
•
Subnet Mask:
The default subnet mask is 255.255.255.0. Set the Subnet mask the
camera will have on your ViconNet system
•
ISP Gateway:
You must set a Gateway address in the same subnet as your IP
Consult your IT administrator as required.
Be sure to correctly check either Dynamic IP Address (DHCP) or Static IP Address. Vicon recommends a
Static IP Address. If a Dynamic IP Address is desired, refer to Appendix on how to use the IP Utility.
Important:
After the IP address is changed, be sure to keep a record of it; you will need it later in order to
configure the camera in the ViconNet software.
After all IP addresses have been set, the PC can be changed back to original settings if necessary.
After setting all the cameras’ IP addresses, you can continue with camera configuration or exit and define the
camera(s) later in the ViconNet system.
Use the Host Setting screen to configure camera network information.
XX181-20-00 Rev 908 VN-957V5 IP Camera
