Vicon AurorAcord, Инструкция по эксплуатации

Страница: 48 / 90

XX091-01-01 Rev 902 AurorAcorD Programming
•
35
Disk Functions
Note: All disk functions are discussed in the Operation chapter except for Disk End Action (described below).
1. Access the Hard Disk Functions screen.
1 Hard Disk Functions
2 Floppy Disk Functions
3 CD-RW Disk Functions
DISK FUNCTIONS
to Choose. to Go Back.
or 1-16 to Select.
1 Display Setup
2 Camera Setup
3 Alarm Setup
4 Serial Port Setup
5 Time/Date Setup
6 Record/Playback Setup
7 System Setup
8 Disk Functions
MAIN MENU
to Choose. to Go Back.
or 1-16 to Select.
Status: 19573 MB Disk
Space Remaining: 19347 MB
Start: 09:18:32 AM 07/18/01
End: 08:56:53 AM 07/18/01
1 alarms on file
Last Erase: 05:46 PM 07/17/01
1 Erase Disk
2 Disk End Action: Recycle
HARD DISK FUNCTIONS
to Choose. to Go Back.
or 1-16 to Select.
Status: Blank CDRW
Start:
End:
0 alarms on file
1 Open/Close CDRW Tray
2 Erase Disk
3 Format Disk
CD Write Speed: 4X
CD-RW DISK FUNCTIONS
to Choose. to Go Back.
or 1-16 to Select.
Status: No Floppy Disk
1 Camera: 1
2 Start: 09:18:32 AM 07/18/01
3 Create Archive
4 Refresh Disk Status
FLOPPY DISK FUNCTIONS
to Choose. to Go Back.
or 1-16 to Select.
2. Select Disk End Actions and choose Recycle (overwrites the hard drive data) or Stop (ceases recording
and displays a message).
Serial Ports
Note: Refer to the AurorANet chapter for the More AurorANet menus. Refer to the Cameras, Receivers and
Motion Detection chapter for information on the Receiver Communication Failure menu.
Perform the following section to define the serial ports.
1. Use the menu path below to access the Serial Port 1 screen.
1 Mode: Prn/Host
2 Baud Rate: 115200
3 Data Bits: 8
4 Parity/Stop Bits: None/1
5 Type:
RS-232
6 Use Ser Port 1 Defaults
SERIAL PORT 1
to Choose. to Go Back.
or 1-16 to Select.
1 Mode: Receiver
2 Baud Rate: 4800
3 Data Bits: 8
4 Parity/Stop Bits: None/1
5 Type:
RS-422
6 Use Ser Port 2 Defaults
SERIAL PORT 2
to Choose. to Go Back.
or 1-16 to Select.
1 Serial Port 1: PRN/Host
2 Serial Port 2: Receiver
3 More AurorAnet Setup
4 More Host Setup
5 Print Alarms: NO
6 Rcvr Comm Fail
SERIAL PORT SETUP
to Choose. to Go Back.
or 1-16 to Select.
1 Print Time Broadcast: No
2 Host Address: 0
3 Command Terminator: CR
MORE HOST SETUP
to Choose. to Go Back.
or 1-16 to Select.
1 Display Setup
2 Camera Setup
3 Alarm Setup
4 Serial Port Setup
5 Time/Date Setup
6 Record/Playback Setup
7 System Setup
8 Disk Functions
MAIN MENU
to Choose. to Go Back.
or 1-16 to Select.