Vicon AurorAcord Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 90

Vicon AurorAcord Скачать руководство пользователя страница 10

XX091-01-01 Rev 902 AurorAcorD

•

vii

Quick Programming: Using Loopback Mode to Optimize Parameters

1 Easy Setup Menu

2 Main Menu

3 Camera Calibration
4 Save/Restore Menu
5 Language
6 FAQ Screen
7 About AurorAcorD

MENU SELECTION

to Choose. MENU to Exit.
or 1-16 to Select.

1 Setup Record Cameras

2 Modify Camera Sequence
3 Start Record
4 Stop Record
5 Normal Rate: 15 fps
6 Alarm Quality: Highest
7 Alarm Rate: Maximum
Sensitivity: Highest

RECORD CONTROL

to Choose. to Go Back.
or 1-16 to Select.

1 Setup Record Cameras

2 Modify Camera Sequence
3 Start Record
4 Stop Record
5 Normal Rate: 15 fps
6 Alarm Quality: Highest
7 Alarm Rate: Maximum
Sensitivity: Highest

RECORD CONTROL

to Choose. to Go Back.
or 1-16 to Select.

1 Loopback Mode: Enabled

2 Adjust Record Cameras

SETUP RECORD CAMERA

to Choose. to Go Back.
or 1-16 to Select.

1 Camera 1: Highest
2 Camera 2: Normal
3 Camera 3: Normal
4 Camera 4: Normal
5 Camera 5: Normal
6 Camera 6: Normal
7 Camera 7: Normal
Camera 8: Normal

RECORD CAMERA QUALITY

to Choose. to Go Back.
or 1-16 to Select.

1 Display Setup
2 Camera Setup
3 Alarm Setup
4 Serial Port Setup
5 Time/Date Setup

6 Record/Playback Setup

7 System Setup
8 Disk Functions

MAIN MENU

to Choose. to Go Back.
or 1-16 to Select.

PLAY

PLAY

PLAY

PLAY

LIVE

LIVE

Note: If Sensitivity is Highest, recording will take place continuously (the Normal Rate must not be set to Off).

Note: Use the AurorAcorD Calculator, available on the AurorAcorD CD, to see how

changing recording settings will change your recording duration.

Quality for each camera and Sensitivity are set to Normal at the factory. Use
the tables following this procedure to choose the best Quality and Sensitivity
setting to maximize recording duration or hard drive usage.

1. If desired, use the spot monitor to display menus so that you can view video on

the main display monitor without the text overlaid on the video.

2. Press the Menu key to display the Menu Selection screen. Select Main Menu.

3. Select Record/Playback Setup.

4. Set the Sensitivity setting to Highest. This will enable you to test the Quality

settings more effectively, as the update will not be dependent upon motion.

5. Select Setup Record Cameras.

6. Set the Loopback Mode to Enabled. Loopback mode is a special mode that

allows you to view video as it will look when recorded, but without recording the
video.

7. Select Adjust Record Cameras, which will display the Record Camera Quality

screen.

8. Change the quality for camera 1 using the onscreen instructions and observe the

quality of the camera video.

9. Change the quality setting and view the video at the new setting. Repeat for all

five settings: Lowest, Low, Normal, High, Highest and choose a setting for this
camera. The Normal setting is the factory default.

10. Select the next camera and repeat this procedure. Continue until quality has

been set for all cameras. Press Live twice to return to Record Control.

11. The sensitivity setting defines how much motion is required before recording

takes place. The sensitivity was set to Highest in a previous step. Observe the
video update with motion in the field of view of any camera (sensitivity is a
global, not per camera setting).

12. Change the Sensitivity setting and observe the video again. Repeat for all

tti

(L

L

t N

l Hi h Hi h t)

d h

th

ti

l

tti

«
...
8
9
10
11
12
...
»

Содержание AurorAcord



























































































Отзывы:

Нет отзывов