Vicon AurorAcord XX091, Инструкция по эксплуатации, Страница: 53 / 92

XX091-04-01 Rev 104 AurorAcorD Operation
•
41
To select a display format, perform the following step.
Press
DISPLAY
to toggle through the available display formats (or press
ENTER
and then a number key 1-9
corresponding to the display format shown below).
Note: Multi-picture display formats are not available on the spot monitor and picture-in-picture format is not
available when in PAL mode.
Note: To display a camera full screen on the current monitor, simply press 1-16 to indicate the camera.
Viewing Disk Status
Perform the following procedure to view the status of the hard drive, floppy or CD drives.
1. Access the Disk Functions screen as shown below.
1 Hard Disk Functions
2 Floppy Disk Functions
3 CD-RW Disk Functions
DISK FUNCTIONS
to Choose. to Go Back.
or 1-16 to Select.
1 Display Setup
2 Camera Setup
3 Alarm Setup
4 Serial Port Setup
5 Time/Date Setup
6 Record/Playback Setup
7 System Setup
8 Disk Functions
MAIN MENU
to Choose. to Go Back.
or 1-16 to Select.
Status: 19573 MB Disk
Space Remaining: 19347 MB
Start: 09:18:32 AM 07/18/01
End: 08:56:53 AM 07/18/01
1 alarms on file
Last Erase: 05:46 PM 07/17/01
1 Erase Disk
2 Disk End Action: Recycle
HARD DISK FUNCTIONS
to Choose. to Go Back.
or 1-16 to Select.
Status: Blank CDRW
Start:
End:
0 alarms on file
1 Open/Close CDRW Tray
2 Erase Disk
3 Format Disk
CD Write Speed: 4X
CD-RW DISK FUNCTIONS
to Choose. to Go Back.
or 1-16 to Select.
Status: No Floppy Disk
1 Camera: 1
2 Start: 09:18:32 AM 07/18/01
3 Create Archive
4 Refresh Disk Status
FLOPPY DISK FUNCTIONS
to Choose. to Go Back.
or 1-16 to Select.
2. Select a submenu: Hard Disk Functions, Floppy Disk Functions or CD-RW Disk Functions. The status
displays at the top of each screen. The table below lists the Status messages for each source.
Source Status Message
Hard Drive Disk size in megabytes
CDRW Drive No CD Disk, Unformatted CDRW, Blank CDRW, Non-Blank CDRW, Blank CDR, Non-Blank
CDR
Floppy Drive No Floppy Disk, Ready (blank DOS formatted floppy), Disk Contains Data, Waiting for Update
(does not apply for AURC-CD320 or AURC-CD500)
Note: Use the Refresh Disk Status function if your floppy drive status is Waiting for Update or you have just replaced a
floppy. Disregard this note for AurorAcorD model number AURC-CD320 or AURC-CD500.
1) Picture-in-Picture, 2) Quad, 3) 3x3, 4) 4x4, 5) Mixed Border, 6) Mixed Half, 7) Mixed Quad, 8) Split, 9) Full.
Note: The Disk Functions screen will not
include the Floppy Disk Functions
selection if your AurorAcorD is model
number AURC-CD320 or AURC-CD500.