VibroSystM LIN-300 Series, Руководство по установке

Страница: 6 / 40

Copyright © VibroSystM Inc., 2010
6 PCS-200ESB Measuring Chain_Overview_Rev. 2
O
The basic measuring chain includes:
LIN-300 modules are usually installed in a protection box, either an ABS housing for a single module, or a
metal cabinet, which can house two modules, and can also house an op24V
DC
power supply.
1.1 Safety information
This manual contains information and warnings that must be observed to keep instruments in a safe condition
and ensure safe operation.
Warning - Danger messages identify conditions or practices that could cause bodily harm, and
result in damage to the measuring chain and other equipment to which it is connected.
Caution messages identify conditions or practices that could result in permanent loss of data.
Qty Description
1 PCS-200ESB Universal Proximity Probe
1 LIN-300 Series Signal Linearization Module, either
a) LIN-304S-6I-0.3/4.3 Linearization Module for a 4mm [157 mils] detection range
b) LIN-306S-6I-0.3/6.3 Linearization Module for a 6mm [236mils] detection range
Option Description
A) 10X6X3 ABS Protection Box
B) 14x12x8 Metal Protection Box without power supply
C) 14x12x8 Metal Protection Box with uni24V
DC
power supply
Warning - Danger
•
To use the described measuring chains correctly and safely, read and follow all the safety instructions
or warnings given throughout this manual.
•
To avoid electric shock, personal injury, or death, carefully read the information under “Safety Infor-
mation” before attempting to install, use, or service the measuring chains.
•
In addition, follow all generally accepted safety practices and procedures required when working with
and around electricity.
•
For safe operation and to ensure that your system functions at its optimum capability, the installation
and adjustment process should be handled only by VibroSystM trained service specialists.