VibroSystM LIN-300 Series, Руководство по установке

Страница: 21 / 40

Copyright © VibroSystM Inc., 2010
21 LIN-300 Protection Boxes_Installation - Rev. 0
O
Mounting a protection box on concrete:
1. Drill into the concrete wall (refer to Figure 6 :
“Mounting holes location ” ) and drive the anchor
bolts with the special punch ( Figure 9 : “Anchor
setting punch for concrete anchors” ).
2. Fasten the ABS protection box as shown (refer to
Figure 8 : “Fastening the ABS protection box on
concrete”
).
Figure 8 : Fastening the ABS protection box on concrete
Figure 9 : Anchor setting punch for concrete anchors
ON CONCRETE
HOLE: DRILL BIT 8mm (5/16'')
DEPTH: 29mm (1-1/8'')
1/4''-20 x 5/8'' BOLT
LOCKWASHER
WASHER
ANCHOR BOLT
1/4''-20
ANTI-VIBRATION MOUNT
PROTECTION BOX
SCREW 10/32 x1/2
LOCKWASHER 10/32
WASHER 10/32
BRACKET