VibroSystM LIN-300 Series, Руководство по установке

Страница: 26 / 40

Copyright © VibroSystM Inc., 2010
26 LIN-300 Protection Boxes_Installation - Rev. 0
O
When using conduit other than the 19mm
(3/4’’) conduit, use the appropriate
liquidtight strain relief connectors according
to the size of the cable.
5. Drill holes for the appropriate liquidtight
strain relief connectors. Refer to Figure
16 : “Mounting the liquidtight strain relief
connectors”
.
6. Install the connectors.
7. Reinsert the mounting panel.
Figure 16 : Mounting the liquidtight strain relief connectors
3.2.6 Fastening the protection box
Choose the location for installing the
protection box.
The protection box can be mounted on a
concrete wall or, whenever possible,
directly onto the structure of the stator or
machine casing.
Figure 17 : Mounting holes location