Viavi MTS 4000 Base Unit, Руководство пользователя

Страница: 76 / 254

Chapter 4 System set-up
Configuring the unit
54
User Manual 77000000206 Rev. 007
Use proxy:
– If Manual has been selected, enter the Proxy Address .
– If Auto has been selected, enter the Pac Address .
Audio
Channel
Select the Hands-free function or the Headset
– If the Hands-free function has been selected, adjust the volume in
the line Hands-free Volume .
– If the Headset function has been chosen, adjust the volume in the
line Headset Volume
Utility
VFL Mode
Select the mode of emission of the light signal:
– 1 Hz: frequency of 1Hz (blinking signal)
– CW: signal is emitted in a Continuous Wave
Auto off
This function switches off the 4000 Platform automatically if no operation
has been performed and no key actuated for a period selected from this
menu. Work in progress is automatically saved.
– To activate this function, open the Utility window and move the
cursor on to Auto off , then choose an option (5, 10 or 30 min.) so
that the 4000 Platform will be automatically switched off if no key
has been actuated for the period selected.
– To deselect this function go into the Utility window, move the cursor
on to Auto off , then choose option No .
Upgrade parameters
When updating the software (see "Installing a new version of the soft-
ware" page 200 ):
– In the server IP address line of the configuration menu, enter the IP
address of the PC on which the updating files were loaded.
NOTE
The function for automatically switching off the 4000 Platform is avail-
able only on battery operation, to save the battery.