Viavi MTS 4000 Base Unit, Руководство пользователя

Страница: 145 / 254

Chapter 8 802.11 Wireless Testing
Wireless testing
User Manual 77000000206 Rev. 007 123
2 To connect to the line, press the RESULTS key to return to the
802.11 Summary screen.
The Product Name/Family Brand will scan for the SSID that you
specified, and attempt to connect to it.
3 To view another result category, do one of the following:
a Press the right or left arrow to cycle through the menus.
b Press the View soft key, and then select a category.
4 After successfully connecting to the wireless network, run your test.
For Data tests, VoIP tests, and IPVideo tests, see MTS 4000 Triple
Play Testing User’s Guide.
Setting Description
SSID Press the ENTER key to scan for service
set identifiers (SSIDs) in the area. If found,
select the desired network to connect to. To
enter a custom SSID, press the Custom
SSID soft key and use the keypad to enter
the SSID name.
Encryption Type Select the type of encryption.
None, WEP40 , WEP104 , WPA/WPA2
(Auto), WPA Only, WPA2 Only
WPA/WPA2 (Auto) will cause the unit to use
WPA2 if available and then fall back to WPA
WPA1/2 PSK Enter the pre-shared key (PSK) to use for
WPA or WPA2.
WEP40 or
WEP104 Key Enter the static WEP key to use.
Region Select your region: US, Japan, EU. The
channels that are available will change
based on the region.
NOTE: Changing the region will restart the
application. If you are running a test this will
cause errors. Only change the region
before a test.