Chapter 3 Installing CPRIAdvisor CAP-100 and CAE-100
CPRIAdvisor Installation Guide
17
LED status light
This LED status light shows the operation status of the CAP-100. Once the CAP-100’s booting is
completed, it changes from red to illuminating green.
NOTE
The green LED is illuminated when there is a valid communication connection.
Grounding connection
It is used to connect grounding of the CAP-100.
-48 VDC port
This port is used to supply the external power, -48 VDC.
Power switch
You can use this switch to turn your CAP-100 on and off.
Rear view
Figure 2
CPRIAdvisor CAP-100 rear view
No.
Description
Optical input port
Optical input port
You can use this port to connect optical LC cable. The CAP-100 has 16xLC optical ports.
CAUTION
Do not apply or connect power exceeding -4 dBm to this optical LC port. If such power is
applied, it will degrade the device’s performance and can cause damage to the device in
worst case.
