44
CPRIAdvisor Installation Guide
uplink or 8 to 20 for downlink. A default value is 12.
Click the down arrow for Stuffing bit, and select the option between 0 to 20. A default
value is 3.
Check or uncheck for the Aggregation.
Check or uncheck for the Compression.
d
In AxC Container section
The number of AxC container required varies depending on bandwidth and link
rate.
Table 8
and
Table 9
show the settable value range.
Table 8
Value per each link rate
Link rate (Mbps)
Value
614.4
0 ~ 59
1228.8
0 ~ 119
2457.6
0 ~ 239
3072.0
0 ~ 299
4915.2
0 ~ 479
Table 9
The number of AxC position required per bandwidth
Bandwidth (Mhz)
Number of AxC containers
20
8
20 (AxC 6) (if you check Compression)
6
15
6
15 (AxC 4) (If you check Compression)
4
10
4
5
2
3
1
1.4
1
14
After completing each field with a proper value, press the
Enter
key on your keyboard.
NOTE
You can duplicate the profile value to another profile with
Ctrl+c
and
Ctrl+v
. Or,
right-click the profile icon and copy and paste.
Checking your setup
To check the above setup values are properly applied to your installation environment, you need to
following the procedure below.
Procedure
1
Select
Alarm Monitoring
from the drop-down list at the bottom of the
Probe Information
Management
pane.
