Chapter 3 Installing CPRIAdvisor CAP-100 and CAE-100
24
CPRIAdvisor Installation Guide
4
Connect the three 12xMPO (12pin MPO) connectors on the rear of MPO adapter of the
MPO Adapter panel.
5
Connect the 36xLC connectors on the other side to 36 optical input ports aligned with the
number in the label on the rear of the CAE-100.
6
Connect a DIN cable to the Exp Ctrl port or the upper layer CAP-100 or Control out port of
upper layer CAE-100
.
7
Connect each optical cable from an COM port of the CAE-100 to the designated optical
input ports of the CAP-100 based on the CAE-100 ID.
