CPRIAdvisor Installation Guide
43
a
In Carrier Information Section, do the following steps
Click the down arrow for Link direction, and select the option between uplink or
downlink. The channel and frequency vary based on the link direction you selected.
Click the
icon next to the channel standard.
Select the technology, band, frequency and channel range by clicking the right
values you need in the channel standard list window
.
NOTE
Based on your selection from the channel standard list, the following five values in
the Carrier Information change: Technology, channel standard, frequency, link
direction, and channel. From the link direction drop-down list, the channel and
frequency change based on the selection for uplink or downlink.
Enter a PCI/Scramble code value between 0 to 512. A default value is 0 (optional).
Click the down arrow for Bandwidth, and select the option between 8 choices. A
default value is 10.
Click the down arrow for Antenna number, and select the option between 1 to 8. A
default value is 1.
b
In Optical Information Section, do the following steps:
Click the down arrow for Interface, and select the option between CPRI or OBSAI. A
default value is CPRI.
Click the down arrow for Link rate, and select the option between 5 choices. A
default value for CPRI is 4915.2 Mbps and for OBSAI is 3072 Mbps.
c
In CPRI Map Information Section, do the following steps:
Click the down arrow for Sample width, and select the option between 4 to 20 for
