58
Using your Viasat box
Code blink out
Once you have found the correct code, you can use your remote control to perform a
‘code blink out’ to determine what this code is.
1. Press the
TV
button on your remote control and release it.
2. Press and hold down
SETUP
, until the red LED under the TV button blinks twice.
3. Use the
number
buttons to enter
9 9 0
. The red LED under the TV button blinks
twice.
4. Press
1
and count the LED blinks.
5. Press
2
and count the LED blinks.
6. Press
3
and count the LED blinks.
7. Press
4
and count the LED blinks. Now you have found the 4-digit code.
If, during step 4, 5, 6 or 7, the LED does not blink at all, the code digit is 0.
8. For future reference, write down the code in the space provided in the remote
control battery compartment.
Using the TV code table
If, after performing a code search, your remote control still does not operate your
television, you may be using the wrong code. Try repeating the search again to locate the
correct code. If this fails, you can use the TV code table available for download from the
Viasat website.
1. Download the TV code table from the Viasat website (www.viasat.se), find the brand
of your television in the TV code table and select the first 4 digit code in the list.
2. Make sure your television is fully on (not in standby), and then press the
TV
button
on your remote control and release it.
3. Press and hold down
SETUP
, until the red LED under the TV button blinks twice.
4. Use the
number
buttons to enter the 4-digit code for your television (the TV button
will blink twice after you have entered the fourth digit).
5. Press
S
to see if you are able to switch off your television.
If your television does not respond, repeat steps 1 to 5 with each code listed for your
brand. If none of the codes operate your television, or if your brand is not listed, retry
the code search described on page 55.
6. Switch your television back on by pressing a
number
button (or
ch +
) and check if
all the functions are working correctly.
7. For future reference, write down the code in the space provided in the remote
control battery compartment.
Resetting your remote control
To clear all the settings you have made to your remote control and apply the factory
defaults:
1. Press and hold down
SETUP
, until the red LED under the TV button blinks twice.
2. Use the
number
buttons to enter
9 8 1
. The red LED under the TV button blinks
twice.
Extra Information
Содержание Pace 460PVR
Страница 1: ...Pace 460PVR Användarmanual ...
