ViaSat Pace 460PVR, Руководство пользователя

Страница: 16 / 67

5
ENGLISH
Adapter for Sweden
Adapter for Denmark
Adapter for Norway
and Finland
Installation
1. Insert one end of the supplied telephone lead into the
telephone socket (marked TELEPHONE LINE) on the rear
panel of your box, as shown in the diagram at the top of
the page.
2. If you need to use an adapter, choose the correct adapter
for your location. If you are not sure which one to use,
compare with your telephone connector.Insert the free
end of your supplied telephone lead into the RJ11 socket
on the adapter.
3. Remove your telephone connector from your telephone
wall socket. Insert your telephone connector into the
correct socket on your adapter.Insert the adapter into
your telephone wall socket.
Connecting a ‘magic eye’
You can connect a ‘magic eye’ (not supplied) to the secondary
RF output (marked
RF OUT - 2
) on the rear panel of your
box, so that you can operate your box from a different room.
To connect the ‘magic eye’, consult the instructions that came
with it.
Connecting to the mains supply
Once you have safely made all the other connections, you can connect your box to the
mains supply.
1. Using the supplied mains lead, insert the box mains connector into the mains input
(marked 230V 50Hz ) on your box, as shown in the diagram below.
2. Connect the mains plug to the mains wall socket as shown in the diagram below.
3. If there is a switch by the mains wall socket, switch it on.
4. Connect your other equipment to the mains supply.
WARNING
DO NOT connect the mains plug to the wall socket until you have made ALL the other
connections.
❖
❖
230V 50H z
K
C
O
H
S
CI
RT
C
EL
E
F
O
K
SI
R
N
E
P
O
T
O
N
O
D
N
OI
T
U
A
C
1
2
Mains input
Mains
connector
Mains plug
Wall socket