52
Using your Viasat box
1. On the System Settings menu, highlight ‘System Details’, then press
OK
.
2. To redisplay the System Settings menu, press
BACK
.
Viewing the Signal Test screen
You use the Signal Test screen to check that your box is receiving satellite signals, and
check the strength and quality of the signals.
To display the Signal Test screen:
1. On the System Settings menu, highlight ‘Signal Test’, then press OK.
The Signal Test screen displays:
The screen shows bars indicating the strength and quality of the signal being received at
each satellite input.
Your box must receive a signal strength between 49-79 dBuV, preferably above 64 dBuV. If
the signal strength is lower the picture quality is more easily affected by bad weather, such
as rain, thunder storms, etc.
The signal quality should be 1.0E-7BER and the Lock Indicator should display ‘OK’ in order
to successfully find channels. See “Checking the signal” on page 16.
2. When you have finished viewing the Signal Test screen, press
BACK
to redisplay the
System Settings menu.
Installation Setup
You use the Installation Setup menu to change the following settings:
LNB setup;
Default transponder;
Modem setting;
RF output.
The items on the Installation Setup menu are explained in more detail in the following
sections.
To access the Installation Setup menu:
1. Press
iTV
on your remote control.
2. Highlight ‘System Setup’, then press
OK
.
3. Highlight ‘System Settings’, then press
OK
.
4. Highlight ‘Installation Setup’, then press
OK
.
◆
◆
◆
◆
Setup
Содержание Pace 460PVR
Страница 1: ...Pace 460PVR Användarmanual ...