Battery charger / inverter COMBI-GAMMA
10
090138.02
Chapter 1 Installation
This product should be installed by a qualified electrician.
1.1 Box Contents
Combi Gamma
•
Box Containing connection items, ie:
•
KTS battery connector(s).
•
CEE-form 230V connector
•
230VAC AC-in cable with connector.
•
1.2 Location
The product must be installed in a dry and well-ventilated area, as close as possible to bat-
teries. There should be a clear space of at least 20 cm around the appliance for cooling.
Excessively high ambient temperature will result in the following
Reduced service life
•
Reduced charge current
•
Reduced peak capacity or shutdown of the inverter
•
Never position the appliance directly above the batteries.
The product is suitable for wall mounting. The back and the bottom of the enclosure has
holes for wall mounting purposes, see Page 8 and 9.
The appliance can be mounted horizontally as well as vertically; vertical mounting is prefer-
able. The vertical position offers optimum cooling.
The interior of the product must remain accessible after installation. Ensure the AC and
DC input cables are fitted with fuses and circuit breakers. Try and keep the distance be-
tween the product and battery to a minimum in order to minimize cable voltage losses.
For safety purpose, this product should be installed in a heat-resistant environment
if it is used with equipment where a substantial amount of power is to be converted.
You should prevent the presence of e.g. chemicals, synthetic components, curtains or
textiles, etc. in the immediate vicinity.
1.3 Requirements
Crimping tool for cable connectors
•
2 or 4 battery cables (max. length 6 meters) Including battery terminals and cable
•
ends.
