E
nglish
22
SPM32
9.
Storage and transportation
In order to protect your battery powered hydraulic pressing tool SPM32 from possible da-
mage it is necessary to clean it after every use and to protect it with the respective pro-
tection caps. After operation stow away the tool in the provided cotton bag and make
sure it is securely closed.
A
Caution:
Before using the equipment it is necessary to perform a visual inspection to
ascertain the condition of the battery powered press tool. In case of damage do not
use the device.
A
Caution:
Reverse movement in emergency situations is activated exclusively by the
mechanical release lever.
A
Caution:
Do not open the machine! All terms of the warranty become invalid if the
seal is damaged. The equipment must not be operated without protective cover.
A
Caution:
If the service warning light flashes up, the device must be sent to the ma-
nufacturer. The customer is not authorized to perform any maintenance as this would
entail the loss of guarantee and can lead to situations of danger.
Caution:
The typical A-weighted noise level can exceed 70dB (A) during operation. -
Wear ear protection!
A
Caution:
The equipment shall only be operated with the original VETEC power packs.
A
Caution:
The equipment must not be operated in explosive atmospheres.
A
Caution:
Complete shutdown of the equipment takes place exclusively upon remo-
val of the battery.
A
Caution:
If oil leaks from the press tool, it must be sent to the VETEC customer service
department.
A
Caution:
The press tool must not be operated in case of heavy rain or underwater.
A
Caution:
Hydraulic oils pose a risk to the ground water. Uncontrolled discharge or
disposal of hydraulic oils not in conformity with norms may be persecuted under envi-
ronmental protection laws.
A
Caution:
The applied components must demonstrably withstand the occuring tem-
peratures.
