VESTEL 17MB11, Руководство по обслуживанию, Страница: 29 / 59

25
Plasma TV Service Manual 05/01/2006
12.22.2. Features
Video acquisition/clock
• Up to sixteen analog CVBS, split as desired (all of the CVBS inputs optionally can be used to convert
e.g. Vestigial Side Band (VSB) signals)
• Up to eight analog Y + C inputs, split as desired
• Up to four analog component inputs, with embedded or separate sync, split as desired
• Four on-chip anti-aliasing filters in front of the Analog-to-Digital Converters (ADCs)
• Automatic Clamp Control (ACC) for CVBS, Y and C (or VSB) and component signals
• Switchable white peak control
• Four 9-bit low noise CMOS ADCs running at twice the oversampling rate (27 MHz)
• Fully programmable static gain or Automatic Gain Control (AGC), matching to the particular signal
properties
• On-chip line-locked clock generation in accordance with “ITU 601”
• Requires only one crystal (32.11 or 24.576 MHz) for all standards
• Horizontal and vertical sync detection.
Video decoder
• Digital PLL for synchronization and clock generation from all standards and non-standard video
sources e.g. consumer grade VTR
• Automatic detection of any supported colour standard
• Luminance and chrominance signal processing for PAL B, G, D, H, I and N, combination PAL N, PAL
M, NTSC M, NTSC-Japan, NTSC 4.43 and SECAM
• Adaptive 2/4-line comb filter for two dimensional chrominance/luminance separation, also with VTR
signals
– Increased luminance and chrominance bandwidth for all PAL and NTSC standards
– Reduced cross colour and cross luminance artifacts
• PAL delay line for correcting PAL phase errors
• Brightness Contrast Saturation (BCS) adjustment, separately for composite and baseband signals
• User programmable sharpness control
• Detection of copy-protected signals according to the macrovision standard, indicating level of
protection
• Independent gain and offset adjustment for raw data path.
Component video processing
• RGB component inputs
• Y-P
B
-P
R
component inputs
• Fast blanking between CVBS and synchronous component inputs
• Digital RGB to Y-C
B
-C
R
matrix.
Video scaler
• Horizontal and vertical downscaling and upscaling to randomly sized windows
• Horizontal and vertical scaling range: variable zoom to 1/64 (icon) (note: H and V zoom are restricted
by the transfer data rates)
• Anti-alias and accumulating filter for horizontal scaling
• Vertical scaling with linear phase interpolation and accumulating filter for anti-aliasing (6-bit phase
accuracy)
• Horizontal phase correct up and downscaling for improved signal quality of scaled data, especially for
compression and video phone applications, with 6-bit phase accuracy (1.2 ns step width)
• Two independent programming sets for scaler part, to define two ‘ranges’ per field or sequences over
frames
• Fieldwise switching between decoder part and expansion port (X-port) input
• Brightness, contrast and saturation controls for scaled outputs.
Vertical Blanking Interval (VBI) data decoder and slicer
• Versatile VBI-data decoder, slicer, clock regeneration and byte synchronization e.g. for World
Standard Teletext (WST), North-American Broadcast Text System (NABTS), close caption, Wide
Screen Signaling (WSS) etc.