© Vestamatic GmbH
Subject to modifications!
- 43 -
Art.
-N
r.:
84
50
060
1
K
1•
V
est
amatic G
m
bH • Do
hr
w
eg
27 •
D
-41
066 M
önc
he
ngladb
ach •
www.v
est
amatic.
co
m
Information for the user – Basic settings detail 3/3
Touchscreen calibration
The accuracy of the touchscreen can change after a long
period of use, making recalibration necessary.
Press
to start the recalibration and follow the instructions on
the display. The process will involve touching a flashing point in
the top left and then in the bottom right of the screen.
If calibration is successful, you are then able to exit the menu
by pressing the button
. If calibration is not successful, you
will need to touch the flashing points again.
Display/Start wizard
Ä
WARNING!
This menu is password-protected for security rea-
sons. You will find the 4-digit security code on the
invoice for the control system! The security code
is ONLY intended for use by professional instal-
lers and may not be passed on to end users as
this will enable end users to turn off safety-related
settings.
This may cause serious personal injury or damage
to!
You can use the wizard button
to adjust the installation
settings. For example, you can add a motor type to a free
channel group or extend a channel group by adding additional
sensors. After you have pressed the button you will be
requested to enter a security code. You will not be able to
make any changes without entering a security code.
