© Vestamatic GmbH
Subject to modifications!
- 13 -
Art.
-N
r.:
84
50
060
1
K
1•
V
est
amatic G
m
bH • Do
hr
w
eg
27 •
D
-41
066 M
önc
he
ngladb
ach •
www.v
est
amatic.
co
m
Information for the installer – Control box
Connecting 230VAC motors
The control system is designed for the direct connection of 4 × 230VAC motors. The total power con-
sumption of the motors must not exceed 1380 W. Each output has its own terminal for retraction/exten--
sion/neutral- and ground conductor and is protected via a common 6.3 AT fine-wire fuse F2 in the control
system.
I
NOTICE!
– When directly connecting 230VAC motors, also fit a wire bridge with a cross section of
1.5 mm
2
between the terminals L and Common.
Figure:
Wire bridge and direct connection of 230VAC motors
