© Vestamatic GmbH
Subject to modifications!
- 20 -
Art.
-N
r.:
84
50
060
1
K
1•
V
est
amatic G
m
bH • Do
hr
w
eg
27 •
D
-41
066 M
önc
he
ngladb
ach •
www.v
est
amatic.
co
m
Information for the installer – Control box
Assembly / Connection of temperature sensors
TS Pro XL operation
The temperature sensor TS Pro XL is used to record indoor or outdoor ambient temperature. Measured
temperature within the range -30 °C to +55 °C is transformed into electrical analogue signals. These are
evaluated by the control system, which triggers the corresponding control commands.
Assembly of temperature sensor TS Pro XL
The temperature sensor can be installed using the supplied mounting clip. When installing on a mounting
bracket, use clips, cable ties or similar fasteners to attach the measuring cable securely to the bracket so
that the cable cannot be damaged by flapping and fraying during high winds.
TE Indoor
The room temperature controller TE Indoor is used to record indoor temperature. A temperature
threshold can be set within the range +5 °C to +30 °C using the adjusting knob.
Assembly of temperature sensor TE Indoor
The room temperature controller may be used indoors and is suitable for surface mounting or for
mounting directly onto a flush mounting box with vertical fixing holes.
TE Outdoor
The frost/temperature monitor TE Outdoor is used to record outdoor temperature. A temperature
threshold can be set within the range -20 °C to +35 °C using the adjusting knob.
Assembly of temperature sensor TE Outdoor
The frost/temperature monitor is suitable for surface mounting out-of-doors with the cable inlet pointing
downwards.
Choice of assembly location
When mounting temperature sensors, avoid placing in direct sunlight as this will influence the measured
value.
Maintenance / Cleaning
The devices work maintenance-free. If the sensors (not TE Indoor) become excessively soiled, they can
be cleaned with standard household cleaning products as long as these do not contain any aggressive
or abrasive ingredients.
Cable lengths
If the 5 m signal cable is too short, it can be extended up to 100 m using the same cross section.
