© Vestamatic GmbH
Subject to modifications!
- 39 -
Art.
-N
r.:
84
50
060
1
K
1•
V
est
amatic G
m
bH • Do
hr
w
eg
27 •
D
-41
066 M
önc
he
ngladb
ach •
www.v
est
amatic.
co
m
Information for the user – Basic settings detail 1/3
User menu
Press button
to go from the user menu to the basic
settings which are divided into 3 pages (Detail 1/3, Detail 2/3
and Detail 3/3).
I
NOTES!
– The times and values used in the following displays in this user guide are provided as
examples. Only the symbols, arrows, texts and the warning information correspond to
the actual display.
– The control will automatically return to the user menu 2 minutes after the last entry is
made in the basic settings menu. All changes made will be automatically saved.
Basic settings page 1
Basic settings detail 1/3
On this page you can set the time, change the display colour
setting, activate the display’s standby time or configure the
system release following a fire alarm.
= Settings for time, year, month, day,
automatic summer/winter time changeover
= Setting the display colour selection
= Setting the display standby time
= Release following fire alarm
= to page 2 of the basic settings or back to page 1.
Press
to return to the user menu.
Setting the time / date
Set your current time zone here using the “GMT” (Greenwich
Mean Time) button and the and .
Press
to set the year.
Press
to set the month.
Press
to set the day.
Press
to set automatic summer/winter time changeover.
The symbol indicates the active function.
Press
for the previous menu.
I
NOTE!
The clock is internally powered by a buffer battery which means that the date and time
are saved even if there is a power failure. If a DCF Receiver is connected and there is
sufficient clock signal, the time and date will be set automatically.
