© Vestamatic GmbH
Subject to modifications!
- 36 -
Art.
-N
r.:
84
50
060
1
K
1•
V
est
amatic G
m
bH • Do
hr
w
eg
27 •
D
-41
066 M
önc
he
ngladb
ach •
www.v
est
amatic.
co
m
Information for the user – General notes
Automatic control
Before a channel group can be changed from manual control to automatic control, the channel group
must first be activated. Touch the group to activate it. An active group is shown by the symbol
. Press
the symbol
to change the group to automatic control. This is indicated by the auto symbol
in the
top right-hand corner of the display.
I
NOTE!
While in automatic mode it is still possible to control the channel group manually using the
up / down or on
/ off
buttons. If manual operations are carried out while in
automatic mode, automatic operation will be disabled until the next control cycle.
Examples
Weather info / Status indication
By pressing the button you can call up weather information
from the assigned sensors. The highest value of each sensor
group will be shown. This means that if several lux sensors are
assigned in a channel group, the value of the sensor with the
highest sun intensity level will be displayed. Also shown is the
last retract/extend command carried out for the selected
channel group.
Press
to return to the main screen.
Example sensor values for channel group 1:
Wind speed:
18 km/h
Sun intensity:
6 kLux
Temperature:
25 °C
Example
Lock / Unlock display
The display can be locked for cleaning or to prevent
unauthorised access. Press button
for 3 seconds to lock
the display.
The symbol
will appear, indicating that the display is
locked. To unlock the display, press and hold button
for
3 seconds.
Information for the user – Weather info / Display lock / Comfort program
