39
temperature drops below the threshold. When the temperature rises above set value again,
the Control Panel will stop alarming and send Low Temperature Restore report.
IR Camera Alarm Image
This is to select the resolution and number of pictures taken by PIR Camera when the
camera detects a movement in armed mode.
Options available are 640x480x3 images, 320x240x6 images, 320x240x3 images,
640x480x1 image (RF only), and 320x240x1 image (RF only).
<NOTE>
After configuring the setting of alarm image in Panel Setting page, be sure to go to “Edit”
under the device management page of the PIR camera, and choose “Submit” to complete
the setting. (This device setting can be configured on the BOGP LCD screen, the PC
programming webpage as well as the Home Portal Server.)
Outdoor IR Camera in Grayscale
Choose whether or not to show the captures of IR camera in grayscale.
Quick Key
This is for you to set whether to turn on/off the Quick Key arming feature with the panel’s
keypad. When turned on, you can arm the control panel with a simple press of Away Arm key
(1 second) or Home Arm key (2 seconds) on the keypad without entering User PIN Code. If
turned off, you can only arm the panel by entering User Pin Code first followed by one press
of the Away Arm key or Home Arm Key.
Time Zone
This is for you to set your Time Zone.
Date & Time
This is for you to set your current date and time.
After finishing Time Zone and Date/Time setting, press “
Adjust Time
” to confirm the change.
Reset Panel
Press the “
Reset Panel
” button to restart the Control Panel.
Factory Reset
Press the “
Factory
Reset
” button to clear all stored information and settings in the Control
Panel, all settings will be returned to factory default. You can choose to tick the box for “Keep
Network Setting” or “Keep Device Setting” before pressing Factory Reset to keep part of the
settings unchanged.
Backup and Restore
This function is used to create a backup file for your Control Panel’s current system
configuration, or restore your Control Panel with a previous back up file.
Click “
Backup & Restore
” to enter Backup and Restore page.
