10
setting, you will be asked to enter an
account number.
Step 5.
Enter the IP address for IP reporting,
telephone/mobile number for SMS
reporting, or email address for email
reporting
Step 6.
For IP reporting, enter the port number.
Step 7.
Select a group for the report
destination.
The reporting priority is based on to
group number sequence. From Group
1
Group
Group 2
Group 3
….etc
When more than one reporting
destinations are assigned to a group,
if a report is sent to one of the
detinations successfully, the system
will stop reporting to the rest of the
reporting destination in the same
group and move on to report to the
next group.
If the Control Panel fails to send report
to the first detination in a group, it will
move on to the next reporting
destination. If reporting to all
destinations in the group fails, the
Control Panel will retry the report
group for 2 times before moving on to
the next group.
If the Control Panel fails to report to all
reporting groups, it will NOT restart
reporting from Group 1 until at least
one groups successfully receives the
report.
Step 8.
Select the event type to be reported to
this report destination.
All:
All events will be reported.
Status:
Only status events will be
reported.
Alarm:
Only
alarm events will be
reported.
2.4. Test Report
This function is for you to test the reporting
destination you entered.
Step 1.
Select
Test Report
and press
OK
to
confirm.
Step 2.
The Control Panel will send a test
report to the first reporting destination.
2.5. Test Siren
Use the function to test both Control Panel’s
built-in siren and any external siren/bellbox
learnt into the Control Panel function
Step 1.
Select
Test Siren
and press
OK
to
confirm.
O K t o S t a r t
Wa r n i n g : L o u d !
Step 2.
Press
OK
to confirm. both Control
Panel’s built-in siren and any external
siren/bellbox learnt in the panel will be
activated.
P r e s s O K t o S t o p
Step 3.
Press
OK
again to stop the siren.
2.6. GSM Setting
The GSM function allows you to program
GRPS network.
Step 1.
Select
GSM Setting
and press
OK
to
confirm.
A n t e n n a
G P R S S
e
t t i n g
G S M S
i g
n
a
l
G S M R
e
s
e
t
Antenna (For BOGP-3-EX-G2 models
only)
You may choose whether to employ external or
internal antenna.
Step 1.
Select
Antenna
and choose the
desired antenna type..
I n t e r n a l
E x t e r n a l
Step 2.
Press
OK
to confirm setting.
GPRS Setting
In order to use GPRS to serve as a back-up IP
Reporting method, this section will need to be
programmed before reporting.
Step 1.
Select
GPRS Setting
and press
OK
to
confirm.
A P N
U s e r
P a s s Wo
r d
Step 2.
Select
APN
and press
OK
to confirm.