background image

 

3

Product Features

 

Special Features 

The BBZ-E is the high-performance ionizer that is focused on the noise reduction, the expansion of 
the static eliminating area and the durability. 

 

  * Corona Discharge AC type 

AC corona discharge performance won't dirt the needle nor the Ion balance off. 
High frequency voltage transformer produces ion in its high performance without ion re-uniting loss. 

 

* Silent Nozzle   

   The BBZ-E is an excellent noise reduction model. It is about 10 db lower noise compared to 

conventional model with the standard nozzle. 

 

* High Luminance LED Beam Built-in

 

      This high luminance LED beam makes it easy to check fine dusts stained on the surface of the articles.   
 

* LED Display 

      Both sides of Handle Grip display "ON" LED and "ALARM" LED for clear checking by left or right handed.   
     

Working "ON" display      :Working "ON"    Green LED at Power Switch 

     

High Voltage Warning      :RED H.V. LED blinks when High Voltage Alarming is found in the power 

supply and output shuts down by the built-in transformer. 

 
 

* Compact and Light Weight 

 

High Voltage power supply cable is not necessary. High Frequency Voltage Transformer is built in for 
safety, this compact design secures high performance of using this gun pin-pointedly over the required 
spot. Power source should be DC24 Voltage. Supply to this main body should be given by attached 
power supply adapter. 

 

* Long power cable 

 

The attached power adapter has a 5m cable. Good handleability. 

 

 * Maintenance 

 

Replacement of the electrode could be easily done with Electrode needle replacement 
screwdriver (separately sold).   

 

* Environmentally Friendly   

Compliant with RoHS standards.   

 

* EMI Countermeasures

   

Lower noise performance won't merely influence other electronic devices. 

* CE Compliance     

The BBZ-E has been tested and approved under CE directive, EN61000--6-4, 6-2. 

 

Uses 

Use the BBZ-E to blow away stubborn dust that adheres because of static electricity or to remove 
static electricity as a preventative measure against dust accumulation. 

Содержание BBZ-E


















Отзывы: