Vessel BBZ-E, Инструкции по эксплуатации

Страница: 17 / 17

Advice to use the BBZ-E for a long time
Before starting using the BBZ-E, band the air hose and the power cable
together with the provided “self-fusion butyl rubber tape”, by bowing the
power cable as shown in the photograph below.
It can prevent the air hose and the power cable from scattering, and it
can also improve durability of the power cable.
Making an extra space by bowing the power cable reduces the load on
the connector and the connecting area.
3 sheets of tape are enclosed. You may band other areas of these cables
with the remaining 2 pieces, taking into consideration the actual work
and/or wiring.

The tape should be prepared by the user if additionally needed. The
provided sheet is made by cutting the following tape to 105 mm in
length each.
<Recommended article>
Self-fusion butyl rubber tape No.15 made by NITTO DENKO
[Size: thickness x width x length] 0.5 mm x 19 mm x 10 m