Vessel BBZ-E Скачать руководство пользователя страница 2

For Your Safety 

 

Safety Precautions 

Carefully read these Safety Precautions before use. Observe the precautions indicated herein to 

ensure safety. 

Safety precautions in this instruction manual are categorized into two types by the degree of 

danger associated with each on the followings. Based on danger analyses performed by Vessel, 
all precautions in this instruction manual are of the CAUTION level. 

If the equipment is used in a manner not specified by the manufacturer, the protection provided 

by the equipment may be impaired. 

    WARNING 

Indicates that improper handling can lead to serious injury or even death. 

   

CAUTION 

Indicates that improper handling can lead to minor injury and property 
damage. 

 

 

This symbol indicates a WARNING or CAUTION. 

 

This symbol indicates a prohibited action. 

 

This symbol indicates a mandatory required action 

 

 

CAUTIONS

 

  ROHIBITED 

Do not use BBZ-E in environments that require explosion-proofing. BBZ-E 
is not of explosion-proof construction, therefore explosion or fire may 
occur. 

  ROHIBITED 

Do not use BBZ-E in flammable atmospheres. The corona discharge can 
act as an ignition source and cause an explosion or fire. 

  ROHIBITED 

Do not use BBZ-E in environments subjected to sharp temperature 
fluctuations or dewing. This kind of environment can lead to breakdown. 

  DO NOT WET 

Do not use BBZ-E in highly damp places or anywhere it may be wet by 
water, oil, solvent or other liquid. Contact with moisture can result in 
electric shock or breakdown. 

  PROHIBITED 

Do not use BBZ-E for anything other than static erasure or dust removal. 

  PROHIBITED 

Do not use BBZ-E with power supplies of ratings not specified in the 
specifications. Inappropriate power supplies can result in fire and electric 
shock. 

  PROHIBITED 

Do not install, use or service BBZ-E until having understood the 
information in this instruction manual. 

  REMEMBER 

Keep this instruction manual in a safe handy place for future reference. 

  CAUTION 

Vessel assumes no responsibility whatsoever for consequences arising 
from the use of this product. 

 PROHIBITED 

Never look Into high luminance light beam with your naked eye. 

 

 

 

2

Содержание BBZ-E


















Отзывы: