Vertiv VP7811B Скачать руководство пользователя страница 78 | Manualshive

Страница: 78 / 79

Vertiv VP7811B Скачать руководство пользователя страница 78

Vertiv Intelligent Rack PDU

Page 78

safety ground. The mating electrical interface to this equipment must comply with International
Electromechanical Commission (IEC) standards.

6.2.4. ELECTROSTATIC DISCHARGE

Vertiv strongly recommends that an anti-static precautions be taken when installing, removing,
or working on and around static sensitivity equipment. Industry approved anti-static devices
such as wrist and heel straps, in conjunction with conductive foam pads, should be available
and implemented only after verifying that they are in good working condition.

Electronic components such as memory modules, circuit boards, and LED displays, are sensi-
tivity to Electro-Static Discharge (ESD). Handling of such components should be done only after
proper anti-static workspace conditions have been established. Any static producing packing
materials such as plastic, Styrofoam, and some cardboards, should be removed and discarded
in a timely manner.

6.2.5. EXPLOSIVE ENVIRONMENT

Do not operate this equipment in the presence of flammable gases or fumes. Operation of any
electrical equipment in such an environment constitutes a definite safety hazard.

6.2.6. SERVICING AND ADJUST MENTS

Do not attempt to service this equipment, there are no field serviceable parts or sub-assemblies.
Any adjustments should be made by authorized service personnel only.

6.2.7. REPAIRS AND MODIFICATIONS

Because of the danger of electrocution and/or severe health hazard, do not install substitute
parts or preform any unauthorized modifications of this equipment. It is best to contact Vertiv for
Warranty and Repair Service to ensure that safety features are maintained.

«
...
76
77
78
79
»

Содержание VP7811B
















































































Отзывы:

Нет отзывов