Vertiv VP7811B, Руководство пользователя, Страница: 70 / 79

Vertiv Intelligent Rack PDU Page 70
The SNMP-V1/V2c and SNMP-V3 Service can be enabled or disabled independently as desired. The
service will normally listen for data-read requests (a.k.a. "GET requests") on Port 161, which is the usual
default for SNMP services; this can also be changed if desired.
The Management Information Base (MIB) can be downloaded from the unit, if needed, via the MIB link at
the top of the web page. Clicking this link will download a .ZIP archive containing both the MIB file itself,
and a CSV-formatted spreadsheet describing the available OIDs in a human-readable form to assist you
in setting up your SNMP manager to read data from the unit.
Figure 3-34 SNMP Users Configuration Page
The
Users section allows you to configure the various Read, Write, and Trap communities for SNMP ser-
vices. You can also configure the authentication types and encryption methods used for the SNMP v3 if
desired. Click the Modify icon to change settings.
Figure 3-35 SNMP Traps Configuration Page
Traps allows you to define the IP addresses and SNMP types that you wish the traps to be sent to.
Figure 3-36 SNMP Traps/Types IP Configuration Page
To configure a trap destination:
1. Locate the Traps section of the SNMP page, and click on the Add icon.
2. Enter the IP Address which the trap should be sent to in the Host field, change the Port number if
required, select the trap Version to be used (v1, v2c, or v3), and click Save .