Vertiv VP7811B Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 79

Vertiv VP7811B Скачать руководство пользователя страница 40

Vertiv Intelligent Rack PDU

Page 40

Using a smart device, such as a smart phone or tablet with the Vertiv Mobile app installed, it is possible to
capture data from the LED display when running in VLC mode, which can be enabled/disabled easily by
using the display buttons on the device, or using the GUI on monitored units.

By default, the Vertiv Upgradeable LED display will provide the Current (Amps) per input and cir-
cuit/breaker. By enabling the VLC feature, the LED Display will scroll through a set of alpha-numeric char-
acters. Utilizing the Vertiv Mobile app the user can scan the LED display and retrieve additional power
metrics which include Volts, Amps, Watts, Volt-Amps and Kilowatt Hours. Before VLC, the power data
was only available on network connected PDUs by viewing the GUI, or using external software to collect
and display the data. The VLC feature provides this data on local metered only devices, as well as on
monitored units without the need to connect them to the network.

NOTE

To Enable VLC

– Press the center square

button

three times in under 2

seconds as shown in the IMD section - Please see the Interchangeable
Monitoring Device and/or Display section for addition information regarding
how to enable/disable VLC mode.

NOTE

With the release of firmware version 3.3.0, Vertiv has added support for the
VLC feature to all standard Metered and Monitored Vertiv Upgradeable prod-
ucts, as well as a significant majority of its engineered-to-order range. Certain
custom models of Vertiv Upgradeable PDUs may not have VLC support
within the Vertiv Mobile application. If your custom product is not supported
by the Vertiv Mobile app it will be noted in the product specification sheet.
Please contact your sales representative if you would like assistance with
this.

Latest firmware updates can be found at

VertivCo.com/Firmware-Support.

NOTE

Vertiv Mobile app currently available via the App Store for iOS devices. An-
droid version is under development and will be available in the Play Store at
a later date.

«
...
38
39
40
41
42
...
»

Содержание VP7811B
















































































Отзывы:

Нет отзывов