Vertiv VP7811B Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 79

Vertiv VP7811B Скачать руководство пользователя страница 52

Vertiv Intelligent Rack PDU

Page 52

Removal

The IMD is designed to be field replaceable by

qualified service personnel only

. The IMD module is

hot-swappable, meaning it is designed to be replaceable while the PDU is still connected to AC power. If
the Vertiv Upgradable PDU is going to be upgraded by replacing the IMD module, follow the procedure
described in this section.

NOTE

Be sure to have the new IMD module ready for installation immediately af-

ter removal of the old IMD.

1.

Remove disposable ESD wrist strap from package, remove adhesive backing and attach to PDU, put

wrist strap on arm.

2.

Insert Vertiv IMD Removal Tool as shown. Be sure to press tool in level and press in until tool is flush

with face of IMD. Some older versions may require overlays to be removed prior to inserting tool.

3.

Carefully pull tool and IMD straight out about 2 inches. Remove tool from IMD.

CAUTION

IMD is still connected internally. DO NOT pull IMD more than 2 inches
from chassis.

4.

Gently unplug the connector from the IMD.

«
...
50
51
52
53
54
...
»

Содержание VP7811B
















































































Отзывы:

Нет отзывов