Vertiv VP7811B, Руководство пользователя, Страница: 69 / 79

Vertiv Intelligent Rack PDU Page 69
•
Username and Password: The login credentials for the email server. If your server does not require
authentication (open relay), these can be left blank.
Microsoft Exchange servers will have to be set to allow SMTP relay from the IP address of the unit. In ad-
dition, the Exchange server will need to be set to allow "Basic Authentication", so that the unit will be able
to log in with the AUTH LOGIN method of sending its login credentials. Other methods, such as AUTH
PLAIN, AUTH MD5, etc. are not supported.
Figure 3-32 Email Target Configuration Page
To Add or Modify a Target Email address:
1. Click on the Add or Modify icon.
2. Type email address and then click
Save .
To Delete a Target Email address:
1. Click on the Delete icon next to the address you wish to delete.
2. Click the
Delete button on the pop-up window to confirm.
To send a test email:
1. Click on the Test Email icon next to the address you wish to test.
2. A pop-up window will indicate that the test email is being sent. Click
OK to dismiss the pop-up.
5.3.6. SNMP
Simple Network Management Protocol (SNMP) can be used to monitor the unit's measurements and sta-
tus, if desired. SNMP v1, v2c and v3 are supported. In addition, alarm traps can be sent to up to two IP
addresses.
Figure 3-33 SNMP Configuration Page